STORM Airflow High Temperature Dyeing Machine

Full-Mode Model

Switch freely between air atomization, airflow and overflow dyeing. This model is suitable for both thick and tightly woven fabrics and normal knitting fabrics.The lowest liquor ratio of air atomization dyeing is 1:3 and the lowest liquor ratio of airflow dyeing is 1:4.

Pure Overflow Function(Option)

Three different modes in one machine, can switch freely between air atomization, airflow and overflow. Pure overflow mode 3 can be set according to customer's requirement.

Patented Design

Patented direct-link blower with double air vent increases wind pressure greatly. At the same time, the minimum power of single tube is only 3.5KW, the energy consumption is much lower than other similar airflow dyeing machine on the market. A larger blower can be chosen for fabrics that creasing easily.

Standard configuration

1)Flow meter forwater supply control; 

2)Automatic lint filtering system; 

3)Intelligent washing system; 

4)Seam detecting system; 

5)Proportional heating and cooling system; 

6)Dynamic drainage and etc.

Super Large Capacity

Max capacity of each tube is 400kg；

Max capacity of the dyeing machine is 4800kg

Ultra Low Energy Consumption

The blower minimum energy consumption is 3.5KW/tube, close to that of overflow dyeing machine. 

Meanwhile, the machine saves water similar as airflow dyeing machine.

High Quality Dyeing Method

When the amount of liquid is certain, by increasing the flow rate of the dyeing liquid (that is, increasing the nozzle pressure), the number of cycles of the dyeing liquid can be increased, the temperature in the dyeing machine, the uniform distribution of the dye, the contact number of the dye and the fabric can be increased, and the dyeing time can be shortened. At the same time of increasing the fabric speed and increasing the dye circulation number, it should be noted that the mutual coordination between the winch speed and the nozzle pressure, otherwise it will directly affect the product quality.